The floodlight is a kind of landscape lighting lamp that we can often see, which is often installed on the corner or trunk of the building. If it is installed on trees, will it affect the trees? Then how to fix the LED floodlights?
In order to reduce the friction between the hoop bracket and the trunk, a black rubber pad with a thickness of 4mm is used on the inner side of the hoop bracket; at the same time, in order not to affect the appearance, the rubber pad is cut into strips of the same width as the hoop, and fixed on the hoop with a tie wire. When the rubber washer is installed in place, it is stressed first, tightened properly, and then equipped with a light projection lamp, so as to effectively ensure that the bark will not be damaged.
And in the process of the trunk growing coarser, there is a certain buffer due to the elasticity of the rubber skin itself, and the hoop nut is loosened twice a year according to the growth of the tree, so the hoop will not cause damage to the tree.
Finally, because the LED projection lamp belongs to cold light source, it adopts active cooling design, and the practical time is not more than four hours. Therefore, the thermal damage to trees during installation can be ignored.
