1. Control the exposure time of LED plant light according to the degree of plant's light preference
It is generally believed that almost all living things need rest, so it is certainly not feasible to use LED plant lights to supplement light for plants continuously for 24 hours. After many studies and experiments, it is appropriate to control the time of supplementing light for plants at 16-18 hours, and also to leave 4-6 hours for plants to rest.
For light loving plants, when the weather is clear, the period when the sun light can meet their growth needs is generally 10:00-17:00. In this case, it is necessary to use LED plant lights to supplement the light for plants at 6:00-10:00 and 17:00-00:00, that is to say, it takes about 11 hours to supplement the light for plants with plant growth lights. (Note: it's better to choose between 00:00-6:00 for plant rest time).
In the same way, if the light requirements of plants are not very high, they can already meet their growth needs when there is sunlight. The time for light supplement with LED plant lights only needs to be set according to the local sunrise and sunset time, and the light supplement time should avoid the efficient rest time of plants as much as possible.
2. Set the exposure time of LED plant light according to the planting environment
The plant planting environment mentioned here includes the regional difference between North and south, the difference between spring, summer, autumn and winter, and the difference between indoor and outdoor sunlight.
The regional and seasonal differences can be based on the light law, the closer to the equator, the stronger in summer and the weaker in winter. According to the local conditions, the time of illumination with LED plant growth lamp can be set.
The difference in the light that can be accepted by indoor and outdoor plants is very large. It needs 16-18 hours to supplement the light with LED plant lights indoors. The light intensity of LED plant lights can be adjusted according to the degree of indoor acceptance of natural light. For outdoor plants, supplement the light with plant growth lights, please refer to the first point.
Matters needing attention
1. This product has no waterproof function, do not drench or put in water, otherwise it will cause leakage damage to human body or lamps.
2. When using, make sure that the product is used in normal environment. The working environment of the lamp is - 20-40 ℃, 45% - 95% RH.
3. Avoid installation in the place of heat source, hot steam and corrosive gas, so as not to affect the service life.
4. When the product is lit, do not face the eye directly to avoid injury caused by strong light.
5. Before installation, please cut off the power supply to prevent electric shock and avoid touching the surface of the lamp by hand.
6. Do not knock the product while it is working.
7. Please cut off the power supply during the thunder.
8. Non professionals are not allowed to dismantle the machine. We will not be responsible for any safety problems.
Product maintenance
1. Integrated circuit board, radiator and power supply are all designed into one module, and users can plug and play;
2. No special experience and tools are needed to replace the module;
3. The new design of air circulation system can improve the photosynthesis of plants so as to promote the rapid growth of plants. The latest power supply with low frequency can improve the growth efficiency of plants by 1 / 3-1 / 2;
4. The unique fault self checking system, once the lamp beads are equipped with a voltage stabilizing diode, once one is not on, it will not affect other lamp beads, so as to remind the user to replace the lamp beads in time to repair the fault;
5. Convenient plug-in power cord interface.
