High purity, bright and rich colors. At present, LED products almost cover the whole visible spectrum range, and the color purity is high. The traditional way to obtain color light is incandescent lamp and filter, which greatly reduces the light efficiency.
Super long life, no filament structure, no heating, normal use in more than 6 years. The actual life of LED is more than 50000 hours, several times or even dozens of times that of general light source.
There is no mercury in the light source and there is no ultraviolet in the light beam. LED is a solid light source, which is green and environmental friendly. It is especially suitable for perfume shops, jewelry shops, museums, art galleries and other specialized places, which can meet the special requirements of lighting products. Solid light, good seismic performance, firm and reliable. Energy saving, economic and maintenance free. The power consumption is low. When the same brightness of the traditional bulb is achieved, the power consumption is only 6% of the traditional bulb, and the energy-saving fluorescent lamps contain mercury. The 36mm fluorescent lamp contains 25-45mg mercury, and the 26mm (T8) contains 20mg mercury. The fluorescent lamps use fragile glass as the shell. Once the glass is broken, the mercury in it will evaporate into the air immediately, which can instantly make the concentration of mercury in the surrounding air reach 10-20 mg / m3, 1000-2000 times higher than the national regulations.
It is composed of high brightness LED, which can save more than three times of power than ordinary energy-saving lamp;
. it can form a perfect and durable human body automatic induction lamp when it is installed in the ordinary screw socket; it is a normal phenomenon that the lamp flashes three times and turns off automatically during the initial installation, because there is a light control device inside which is solid and durable, and the LED is completely enclosed in the epoxy resin, which is stronger than the bulb and fluorescent lamp tube. There is no loose part in the lamp body, which makes the led not easy to be damaged. Environmental protection LED is made of non-toxic materials, unlike fluorescent lamp containing mercury will cause pollution, at the same time, LED can also be recycled. There is no ultraviolet and infrared in the spectrum, neither heat nor radiation, small glare, cold light source, safe to touch, which is a typical green lighting source
The number of bolts for fixing the lamp holder shall not be less than the number of fixing holes on the lamp base, and the bolt diameter shall match the hole diameter; for lamps without fixed mounting holes on the base (holes shall be drilled by yourself during installation), each lamp shall be fixed with at least 2 bolts or screws, and the center of gravity of lamps shall be consistent with the center of gravity of bolts or screws. Led ceiling lamps shall not be directly installed on combustible objects, and must be adopted Take heat insulation measures; heat insulation or heat dissipation measures shall also be taken when the high temperature part of the lamp surface is close to combustibles. In recent years, the R & D team has overcome the challenging technical difficulties in the field of LED application, and solved the technical problems in the field of lighting application, such as heat dissipation, light attenuation, light spot and so on. We will continue to adhere to the principle of original independent intellectual property rights as the fundamental driving force.